Pearl Drum Wraps
Established in 1961, Precision Drum was the first company to sell drum wraps for the purpose of recovering drums. We stock over 50 wrap colors , including pearls, sparkles, glass glitters, solid colors and satin flames. We also offer custom wraps, which can be created using computer graphics or photographs.
Our wraps are sold in (24” x 54”) sheets, or pre-cut to fit your drums. Our step-by-step instruction sheet, included with each order, is easy to follow and assures factory-like results. Our wrap is the same high quality product used by the major American drum companies.
Pearl Drum Wraps
General information about drum wraps:
To obtain long-lasting quality, it is important to use the correct adhesive.
3M (30-NF, FASTBOND, Neutral) Contact Cement is the recommended adhesive. You may be able to purchase it in a local hardware store. Or, you may purchase a quart of 3M 30-NF from us. One quart will do at least a five piece drum set.
Note: using any other adhesive products will void our results guarantee.
Additional Helpful Information
The instruction sheet furnished with all wrap purchases gives full information on removing old plastic and installing new covering. Step-by-step instructions will assure perfect, factory-like results.
Most drum wrap orders are shipped within two days of receipt of payment. Occasionally colors are out of stock and will be backordered.
Drum wraps will be rolled into a cardboard box or tube and shipped to you by UPS. When you receive the wrap, unroll it and lay flat until you are ready to recover your drums.
How to order drum wraps:
To request a price quote or place an order, you may phone us toll free at 1-888-512-3786 (in the US) or 845-635-9820. You may also use the quote/order form below. Before doing so, choose a color from the charts above. You will be asked to list your drum sizes. Always list drum sizes as Depth x Diameter.
Drum wraps may be ordered in full sheets or precut to your drums sizes. When ordering full sheets online, just type “full sheet” with a quantity in the “drum sizes” field.
Be careful when calculating the number of sheets required to cover your drums. We recommend allowing 1/2” extra material in depth, and 2” in length. Remember, the length of the wrap is equal to the circumference of the drum:
Circumference = Diameter x 3.14
Right are some examples of drums sizes being cut from full sheets:
Please read the following before ordering drum wraps:
Drum wrap colors and patterns may vary from one “batch” to another, as part of the manufacturers tolerance. If close matching of color or pattern is necessary, please be sure you request a sample swatch of our current wrap material. If you are planning on building or recovering drums one at a time, we suggest purchasing all the wraps together so they are guaranteed to match.
Drums with a diameter larger than 16” will require more than one piece of wrap to cover the drum – creating two seams. Wraps will be cut so that seams will be positioned as close to the bottom of the shell as possible. If seam locations are important to you, please contact us, as wraps may need to be cut differently and at a higher cost.
Pre-cut wraps are provided with 1/2” extra depth and 2” extra length unless otherwise requested by customer.
Glass glitter wraps are extremely brittle, and must be handled with extra care. Precision Drum Company will not take responsibility for any breakage while working with wraps.
Some of the pearl wraps shrink slightly over time. This can result in the wrap seams lifting – a condition that can easily be repaired.
Drum wraps should not be exposed to long periods of direct sunlight. Dark colors like black gloss, black diamond pearl, and charcoal may bubble as a result.
Colors may become discontinued without notice.
When using a paint/finish remover like “Zipstrip” to remove old glue from drum shells, wait at least 24 hours before applying the new glue and wrap.
Drum wraps should be adhered to drum shells using 3M 30-NF contact cement. You may be able to find it in your local hardware store, or purchase it from us. One quart will cover a five piece kit or more. Note: using any other adhesive products will void our results guarantee.
Custom wraps usually take 4-8 weeks for delivery.
Quote / Order email for drum wrap purchases:
If you are requesting a price quote, please email us a list of items you would like to purchase, and include your zip code (or country if outside the US). You should receive a reply within a day. Email to firstname.lastname@example.org
If you would like to place an order, you may either call us at 1-845-635-9820 or email us your name, address, phone number, and list of items you would like. You will receive a reply (usually within a day) with a total price and payment instructions. Email orders to email@example.com